Configuring Native VLAN for OSN Server

You can configure a VLAN ID to access the Open Solution Network (OSN) server through the device's internal port switch. By default, access to the OSN is from VLAN ID 1. Configuring a Native VLAN is useful, for example, to separate traffic within the device - between the OSN (i.e., application traffic) and voice traffic (and data traffic).

This feature is applicable only if you connect to the OSN through one of the device's VoIP LAN ports (on the front panel). If you are connecting to the OSN through the OSN's Gigabit Ethernet port (on the rear panel), this feature is not applicable.

➢

To configure a Native VLAN for the OSN:

1.

Open the Network Settings page (Setup menu > IP Network tab > Advanced folder > Network Settings).

2.

Scroll down to the OSN group:

3.

In the 'OSN Native VLAN ID' field, configure the VLAN ID, and then click Apply.